118 cm2/g at 12 µm fired film thickness (400 mesh, 0.9 mil wire, 0.5 mil emulsion)
Coverage
118 cm2/g at 12 µm fired film thickness (400 mesh, 0.9 mil wire, 0.5 mil emulsion)
Storage and Paste Preparation
Store in a dry location at 5 – 25°C. DO NOT REFRIGERATE. Allow paste to come to room temperature prior to opening. Spatulate well before using, as settling may occur during storage.
Warranty
Material guaranteed to meet specifications for 6 months from date of manufacturing with proper storage.
Printing Parameters
280 mesh stainless steel screen 1.2 mil wire 45° angle 0.6 mil emulsion
Printing Speed
≥ 4 in/sec (≥ 10 cm/sec)
Drying Temperature
150 ºC for 10 minutesMake sure ventilation is sufficient to prevent the wet film from skinning
Process Temperature (TDS)
850 °C peak temperature, 10 minutesat peakTotal cycle time 45 – 60 minutes