- Heraeus Electronics /
- Produkte & Lösungen /
- Dickschicht-Technologie /
- Produktselektor /
- HTR12000AR Series
HTR12000AR Series
- Paste Type: Resistor
- Substrate: Glass, Aluminum (Al)
- Application Method: Screen Printing
- Application: Heaters
Details
Description
The HTR12000AR series is a Pb-free resistor series
that was developed for applications which require
peak firing temperatures lower than traditional thick
film resistors series. The HTR12000AR series is
formulated to fire at a 550 °C peak firing
temperature, which makes this series compatible
with the Celcion materials. This resistor series
makes heaters on aluminum possible.
that was developed for applications which require
peak firing temperatures lower than traditional thick
film resistors series. The HTR12000AR series is
formulated to fire at a 550 °C peak firing
temperature, which makes this series compatible
with the Celcion materials. This resistor series
makes heaters on aluminum possible.
Key Features
Low temperature 550 °C firing Compatible with the IP6075 and C8829D
Metal
Viscosity
Coverage
Coverage
Storage and Paste Preparation
Store in a dry location at 5 – 25°C. DO NOT REFRIGERATE. Allow paste to come to room temperature prior to opening. Spatulate well before using, as settling may occur during storage.
Warranty
Material guaranteed to meet specifications for 6 months from date of manufacturing with proper storage.
Printing Parameters
280 – 400 mesh, 1.1 mil wire and 0.5 mil emulsion screen
Allow prints to level for 5 – 10 minutes at room temperature
Allow prints to level for 5 – 10 minutes at room temperature
Printing Speed
Up to 10 in/sec (25 cm/sec)
Drying Temperature
150 ºC for 10 minutes
Process Temperature (TDS)
Firing range between 550 ºC
Recommended 550 ºC peak temperatures with a 2 – 3 minutes dwell time
Total cycle time of 30 minutes
Recommended 550 ºC peak temperatures with a 2 – 3 minutes dwell time
Total cycle time of 30 minutes
Film Thickness