- Heraeus Electronics /
- Products and Solutions /
- Thick Film Materials /
- Product Selector /
- 9000 Series
9000 Series
- Paste Type: Resistor
- Substrate: Alumina (Al2O3)
- Application Method: Screen Printing
- Application: Hybrid IC, Heaters
Details
Description
Series 9000 resistor system provides excellent stability, low firing sensitivity and low TCR's. The 9000 series is designed to be fired in air at an optimum temperature of 850 °C. All ranges exhibit excellent compatibility with various conductor and dielectric systems.
Key Features
TCR’s of 50 ppm 10 Ω through 1 MΩ
Blendable System Excellent post laser trim stability
Minimal sensitivity to processing variations and
resistor geometries
Extremely tight as-fired resistance distribution
Blendable System Excellent post laser trim stability
Minimal sensitivity to processing variations and
resistor geometries
Extremely tight as-fired resistance distribution
Metal
AgPd
Viscosity
150 – 250
Coverage
Coverage
Storage and Paste Preparation
Store in a dry location at 5 – 25°C. DO NOT REFRIGERATE. Allow paste to come to room temperature prior to opening. Spatulate well before using, as settling may occur during storage.
Warranty
Material guaranteed to meet specifications for 6 months from date of manufacturing with proper storage.
Printing Parameters
; printing-280 mesh stainless screen
Printing Speed
Drying Temperature
Process Temperature (TDS)
firing-30 minute cycle to peak
temperature of 850 °C for 10 minutes.
temperature of 850 °C for 10 minutes.
Film Thickness
12µm emulsion thickness to a dried thickness of 20-22 µm