C2030 is a screen printable 3.0:1 Silver/Palladium pasteand general-purpose fritted conductor material, suitable for a wide variety of applications, where excellent performance is called for. It is also ideal for use as a resistor termination.
Key Features
Excellent solderability and leach resistance#Solderable on alumina and HERAEUS dielectrics#
Compatible with HERAEUS resistors and dielectrics#Excellent initial and aged adhesion, even after multiple firings on alumina and when fired on dielectrics
Metal
AgPd
Viscosity
30-50 Pas (25 °C, D = 100/s)
Coverage
80 cm2/g (FFT: 12 um)
Coverage
80 cm2/g (FFT: 12 um)
Storage and Paste Preparation
Store in a dry and cool condition at 2-23 °C in a dark place with container tightly shut, When stored in a refrigerator, the paste should have acquired room temperature before being opened,
Warranty
12 months
Printing Parameters
Print through a 200-325 mesh. stainless steel screen.
Printing Speed
Up to at least 20 cm/s
Drying Temperature
Dry at 125-50 °C for 10-15 minutes
Process Temperature (TDS)
Fire at 850 °C (peak) for 10 minutes, and with a total firing cycle time of c. 30-60 minutes.