R8900B
- Paste Type: Resistor
- Substrate: Alumina (Al2O3), Stainless Steel
- Application Method: Screen Printing
- Application: Hybrid IC, Heaters
Details
Description
The R8900B Series Resistor is a stable, low TCR system.
The low change in resistance under electrostatic discharge
and high standard working voltage make it a perfect
system for small geometry chip resistors. Laser trimming of
the R8900B Series can be performed at production
speeds with a high degree of stability. Low print thickness
and short firing profile make the R8900B series an
economical system to process. A TCR of ± 100ppm is
standard between 10ohm and 1Mohm values.
The low change in resistance under electrostatic discharge
and high standard working voltage make it a perfect
system for small geometry chip resistors. Laser trimming of
the R8900B Series can be performed at production
speeds with a high degree of stability. Low print thickness
and short firing profile make the R8900B series an
economical system to process. A TCR of ± 100ppm is
standard between 10ohm and 1Mohm values.
Key Features
TCR’s of less than 100 ppm
Process insensitivity
Refire stability
High standard working voltage
Excellent trim characteristics 30-minute profile
Process insensitivity
Refire stability
High standard working voltage
Excellent trim characteristics 30-minute profile
Metal
Viscosity
1500 – 2500
Coverage
Coverage
Storage and Paste Preparation
Store in a dry, cool (5 - 25°C), dark place with container tightly shut. Allow paste to come to room temperature prior to opening. Spatulate well before using.
Warranty
Material guaranteed to meet specifications for 12 months from date of manufacturing with proper storage.
Printing Parameters
Printing Speed
Drying Temperature
Process Temperature (TDS)
Film Thickness