SC1001 is a screen printable 99:1 Silver / Platinum conductor for application of dielectric on steel. SC1001 shows excellent fired film density, high conductivity, good solder leach resistance, and excellent solder acceptance.
Key Features
Excellent solderability#Compatible for SD1010A and SD1019#Compatible with SR21 and SR22 Series resistors#Excellent initial and aged adhesion, even after multiple firings#Very good conductivity#Excellent fired film density
Metal
AgPt
Viscosity
20 - 40 Pa·s 25°C, D = 100/s
Storage and Paste Preparation
Store in a dry, cool, dark place at 15 - 25°C with container tightly shut to ensure shelf life. Allow paste to come to room temperature prior to opening.
Warranty
Material guaranteed to meet specifications for 6 months from date of manufacturing.
Printing Parameters
Print through a 200 - 325 mesh stainless steel screen.
Printing Speed
Up to 20 cm/s
Drying Temperature
Dry at 150°C for 10 - 20 minutes
Process Temperature (TDS)
Fire at 850°C (peak) for 10 - 12 minutes, and with total firing cycle time of c. 30 - 60 minutes