SD1000

Description

SD 1000 is an 850 °C firing glaze for insulating Cr steel. It displays the following benefits:

Key Features

It fires to an extremely dense, hermetic film, allowing excellent electrical performance at a total fired film thickness of ≥ 70 μm Excellent adhesion of heater and termination pastes Co-firing of heater and termination pastes possible No steel pre-treatment necessary. Simply remove the protective film, inspect surface for remaining adhesive and commence printing Excellent adhesion of heater and termination pastes

Viscosity

30 – 50 Pas (23 °C, D = 33/s)

Coverage

 

Coverage

 

Storage and Paste Preparation

store in a dry, cool
(5 – 25 °C) and dark place
with container tightly shut

Warranty

3 months

Printing Parameters

Print through 165 – 325 mesh stainless steel screen. A print-dry fire sequence is advised for each layer.

Printing Speed

 

Drying Temperature

Dry at 150 °C for 10 minutes.

Process Temperature (TDS)

Fire at 850 – 860 °C (peak) for 8 – 12 minutes, and with a total firing cycle time of c. 60 minutes

Film Thickness