SD 1010A is a lead free, screen printable 850 °C firing glaze for insulating Cr-steel.
Key Features
It fires to an extremely dense, hermetic film, allowing excellent electrical performance at a total fired film thickness of ≥ 70 μm Excellent compatibility with HERAEUS heating tracks and with the conductor termination down the overglaze SD1019
Viscosity
15 – 30 Pa·s (23 °C, D = 33/s)
Coverage
Coverage
Storage and Paste Preparation
Store in a dry, cool (5 - 25°C), dark place with container tightly shut. Allow paste to come to room temperature prior to opening. Spatulate well before using.
Warranty
Material guaranteed to meet specifications for 3 months from date of manufacturing with proper storage.
Printing Parameters
Print through 165 – 325 mesh stainless steel screen. A print-dry fire sequence is advised for each layer.
Printing Speed
Drying Temperature
Dry at 150 °C for 10 minutes.
Process Temperature (TDS)
Fire at 850 °C (peak) for 10 – 12 minutes, and with a total firing cycle time of c. 60 minutes