UV-939
- Paste Type: Polymer Thick Film
- Substrate: PET / Polyimide / PC
- Application Method: Screen Printing
- Application: Heaters, Sensors, Simple Circuits
Details
Description
UV-939 is a ultraviolet light-cured, transparent dielectric that glows when exposed to black light for visual validation of coverage. It can be used for insulating dielectric layers and cross overs. With it's high crease resistance and flexibility, UV-939 is an excellent choice for your insulating layer needs. Capable of targeted area printing or large flood coating areas of your circuit, this material has minimal shrinkage resulting in flat devices post processing.
Key Features
#Glows under black light#5B (ASTM d3359) adhesion to common hybrid electronics substrates#Maintains its electrical integrity over wide temperature and frequency ranges#High scuff resistance with excellent flexibility and crease resistanceExcellent moisture resistance#Withstands extreme thermal shock cycling, from +150°C to well below –50°C
Metal
None
Viscosity
1.5 – 2.5 kcps, Brookfield, SC4-14 spindle at SR 30, 25°C
Storage and Paste Preparation
Store at ambient conditions away from direct light. Material should be thoroughly mixed or rolled on a jar roller at a slow speed for 1 hour prior to use.
Warranty
Material guaranteed to meet specifications for 6 months from date of manufacturing with proper storage.
Printing Parameters
Monofilament polyester (157 to 230 mesh) or stainless steel (165-325 mesh) is recommended
Drying Temperature
Medium pressure mercury bulb (non doped) or equivalent set at 300 watts with a minimum of 600 mj. energy output
Film Thickness
8-12 µm