IP9029H is a green dielectric, particularly developed for use as an acid–resistant overglaze on chip and standard resistors.
Key Features
It can withstand plating solutions, e.g Ni baths with pH – values of 4 – 5 and Pb/Sn baths with pH – values of < 1 Also resistant to mildly alkaline solutions
Metal
None
Viscosity
25 – 45 Pas (25 °C, D = 100/s)
Coverage
c. 111 cm2/g (FFT: 15 μm)
Coverage
c. 111 cm2/g (FFT: 15 μm)
Storage and Paste Preparation
store (n a dry, cool (2 – 23 °C) and dark place with container tightly shut
Warranty
6 months
Printing Parameters
Print through a 200 – 325 mesh stainless steel screen.
Printing Speed
Drying Temperature
Dry at 150 °C for 10 – 20 minutes.
Process Temperature (TDS)
Fire at 580 – 620 °C (peak) for 2 minutes, and with a total firing cycle time of c. 25 – 30 minutes