LPA92-59

Description

LPA92-59 is a screen printable gold conductor paste, designed to metallize punched or laser drilled through-holes in alumina substrates.

Key Features

LPA92-59 contains a glass-filler, for good adhesion on to the inside wall of holes (through-holes) The viscosity has also been adjusted, for good vacuum through-hole printing It also works well as via-fills in multilayer dielectric, for interconnecting conductor layers

Metal

Au

Viscosity

30 – 50 Pas (25 °C, D = 75/s)

Storage and Paste Preparation

"Store in a dry, cool
(2 to 23 °C) and dark place with
container tightly shut"

Warranty

6 months

Printing Parameters

Print through a 200 – 325 mesh stainless
steel screen.
Level at room temperature for 10 minutes.

Printing Speed

Up to at least 10 cm/s

Drying Temperature

Dry at 150 °C for 10 – 20 minutes.

Process Temperature (TDS)

Fire at 850 °C (peak) for 10 minutes, and
with a total firing cycle time of c. 30 – 60
minutes.