UV-2533

Description

UV-2533 is a ultraviolet light-cured, matte-finish dielectric ink used for insulating dielectric layers and cross overs. With it's high crease resistance and flexibility, UV-2533 is an excellent choice for your insulating layer needs. Capable of targeted area printing or large flood coating areas of your circuit, this material has minimal shrinkage resulting in flat devices post processing.

Key Features

#5B (ASTM d3359) adhesion to common hybrid electronics substrates#Maintains its electrical integrity over wide temperature and frequency ranges#High scuff resistance with excellent flexibility and crease resistanceExcellent moisture resistance#Cured with UV light in seconds for high-speed production#Withstands extreme thermal shock cycling, from +150°C to well below –50°C

Metal

None

Viscosity

1.5 - 2.5 kcps. Brookfield SC4-14 spindle @ SR 30, 25°C

Storage and Paste Preparation

Store at ambient conditions away from direct light. Material should be thoroughly mixed or rolled on a jar roller at a slow speed for 1 hour prior to use

Warranty

6 months

Printing Parameters

Monofilament polyester (157 to 230 mesh) or stainless steel (165-325 mesh) is recommended

Drying Temperature

Medium pressure mercury bulb (non doped) or equivalent set at 300 watts with a minimum of 600 mj. energy output

Film Thickness

8-12 µm